About the Maximum Distance Limit

All geometry in a Revit model should be within 10 miles or 16 kilometers of the model's internal origin.

This limitation applies to geometry created in Revit as well as incoming geometry from an import or a link.

When you create a Revit model, you are working on a modeling work plane that is 20 miles or 32 kilometers in diameter, with a radius of 10 miles or 16 kilometers from the internal origin. All geometry for the model, including geometry from an import or a link, should reside within the limits of the modeling work plane.

When geometry is far away from the model's internal origin, the graphical representation of elements becomes less reliable and less accurate. These issues relate to how Revit interprets the modeling work plane as a flat surface. In reality, the Earth's surface is curved. The farther you move away from the internal origin, the greater the likelihood of anomalies in the way that Revit displays the geometry.

The internal origin is not visible. For any Revit model, the internal origin is always positioned at the center of the modeling work plane.

When you first create a model, the survey point and the project base point are located at the internal origin. You can move the project base point to another location.

Best practices