By default, the project base point and the survey point display only in the site plan view. The Internal Origin is off by default in all views. You can make them visible as needed.
You can display the project base point
, the survey point
, and the internal origin
in all types of 2D and 3D views. For cropped views, you may need to resize the crop region to see the points.
- Open the desired view.
- Click View tab
Graphics panel 
(Visibility/Graphics).
- On the Model Categories tab of the Visibility/Graphics dialog, scroll down to Site, and expand it.
- To display the project base point, select Project Base Point.
- To display the survey point, select Survey Point.
- To display the internal origin, select Internal Origin.
When there are linked models present, the project base points
,the survey points
, and the internal origin
are shown in gray.
To temporarily display the project base point, the survey point, and the internal origin in a view, on the View Control Bar click
(Reveal Hidden Elements).
It is possible for 2 or more coordinate points to be in the same position. Symbols for coordinate points in the same position will overlap. For example if the project base point and the survey point are in the same position it will look like this:
