To Add Corner Round to Sheet Metal Face

You can add corner rounds to both inside and outside corners, and you can create fillets or rounds of different sizes in a single operation.

All fillets and rounds created in a single operation are one feature.

1. On the ribbon, click Sheet Metal tab Modify panel Corner Round .
2. In the Radius drop-down list, specify the radius for a selected set of corners. Click to change a radius, and then enter a new value.
3. In Select Mode, click Corner or Feature:
   • Corner. Selects or removes single corners.
   • Feature. Selects or removes all corners of a feature, except the corners that result from intersections between the feature and other sheet metal faces.
4. In the graphics window, select model edges that represent corners.
5. To add rounds with a different radius, select another set of edges.