7-April-2020
Add-Ins |
---|
Resolved the issue that Inventor closes with an error dialog when the AttributeHelper and the Interactive Tutorial addins are both loaded. INVGEN-25029 |
Improved stability closing Inventor files. INVGEN-28398 |
Add-Ins - BIM Translator |
---|
Improved stability when exporting building components (BIM). INVGEN-35893 |
Add-Ins - Content Center |
---|
Resolved issue preventing some family members from being found when doing a search in the Content Center Editor dialog box. INVGEN-33030 |
Improved stability when authoring parts for structural libraries. INVGEN-33689 |
Resolved the issue that a search for a member in a remote Content Center library returned all family members. INVGEN-33998 |
Resolved issue with Search function in a remote Content Center library not finding existing family members. INVGEN-34358 |
Resolved issue preventing all highlighted member from being placed when using the Place from Content Center command on patterned components and using the AutoDrop and Insert Multiple options. INVGEN-34646 |
Resolved issue where search strings that were previously entered did not display the list of previous searches in the search field. INVGEN-34856 |
Improved stability when working with the Copy to command in Content Center. INVGEN-35141 |
Resolved the issue where Content Center Library and Custom Category icons display incorrectly. INVGEN-35252 |
Resolved issue where browser folder libraries with old (yellow) icons display small icons as big and vice versa after migrating from Inventor 2018. INVGEN-36246 |
Add-Ins - Design Accelerator |
---|
Resolved issue where Shaft Generator incorrectly displayed an error message when doing a Rebuild All on a part that included a Keyway. INVGEN-32985 |
Resolved issue where the bolted connection generator creates Through All holes instead of To Face holes. INVGEN-35295 |
Resolved issue where holes are only correctly created in one part after adding a bolted connection to multiple parts. INVGEN-35897 |
Add-Ins - Frame Generator |
---|
Resolved issue preventing referenced body edges in a frame structure from updating correctly after making modifications. INVGEN-35326 |
Resolved issue preventing you from deleting Frame Generator Lengthen end treatments. INVGEN-35395 |
Resolved issue preventing you from inserting frame members when using the German language pack. INVGEN-37812 |
Improved the stability of assembly update where the specific legacy assembly contains a frame structure with Notch end treatments. INVGEN-38174 |
Add-Ins - Simulation - Dynamic Simulation |
---|
Resolved issue where incorrect values were sometimes generated when working in the Dynamic Simulation environment and applying the opposite force direction. INVGEN-34708 |
Add-Ins - Simulation - Stress Analysis |
---|
Improved stability when working in the Stress Analysis environment and deleting of manual contacts. INVGEN-36774 |
Add-Ins - Task Scheduler |
---|
Improved stability when working with Task Scheduler. INVGEN-31569 |
Add-Ins - Tube and Pipe |
---|
Resolved selection priority issue when returning from Tube and Pipe Route environment to Run and Runs environments. INVGEN-17466 |
Improved stability and robustness when working in the Tube & Pipe environment. INVGEN-31735 |
Resolved issue where iProperties did not update correctly when inserting and attaching a Content Center part with a custom parameter to a Tube & Pipe pipe segment. INVGEN-33847 |
Resolved issue where the error message, Apply style failed' displays when saving a new piping style in Tube & Pipe. INVGEN-36169 |
Improved stability when working with routes in Tube & Pipe. INVGEN-36248 |
Resolved issue preventing you from modifying a Tube and Pipe route diameter created with ASTM A53. INVGEN-36350 |
Resolved issues with copied Tube and Pipe styles. INVGEN-36716 |
Resolved issue where a flexible hose style would create sick features after updating the file. INVGEN-36786 |
Resolved issue preventing you from modifying a Tube and Pipe route diameter created with ASTM A53. INVGEN-36823 |
Resolved issue that Hoses in an LOD do not update properly after grounding a part in some Tube & Pipe assemblies. INVGEN-37282 |
Add-Ins - iCopy |
---|
Resolved the issue where Constrain iCopy components fails when in a non-default project. INVGEN-35032 |
Add-Ins - iLogic |
---|
Resolved an issue where assigning a name to a face caused the file size to continue to increase with each face that was named. INVGEN-33878 |
Assemblies - Adaptivity-Flexible |
---|
Improved stability when demoting an adaptive component. INVGEN-35470 |
Assemblies - Constraints-Joint-Assemble |
---|
Resolved issue that Inventor hangs when you drag a component with a rotational constraint after using Drive. INVGEN-30881 |
Assemblies - Create-Place-Edit |
---|
Resolved an issue where iProperty Occurrence does not show precisely 90° after placing part with 90° rotation. INVGEN-31204 |
Resolved issue where the Promote/Demote path defaulted to the last used folder path instead of to the target assembly folder path. INVGEN-36030 |
Assemblies - Derived-Shrinkwrap |
---|
Improved stability when updating a derived part. INVGEN-34012 |
Assemblies - Design Views |
---|
Resolved issue causing an unexpected file size leak when using a design view related workflow. INVGEN-33149 |
Assemblies - Pattern |
---|
A crash that occurs when Delete Pattern is used on a component that has an iMate is resolved. INVGEN-37249 |
Assemblies - Weldments |
---|
Resolved issue where after running a weldbead report the weldment assembly would no longer have a volume override in the physical properties dialog. INVGEN-27346 |
Desktop Viewer |
---|
Fixed the issue where Inventor view lost the ipj. file association after running in Read-Only mode. INVGEN-26523 |
Drawings - Styles |
---|
Resolved issue that prevented changes made to the Section Break Line layer in the Styles Editor were not updating in the drawing. INVGEN-25880 |
Fixed an issue where using "Replace Model Reference" for a drawing view doesn't resolve and update immediately. INVGEN-38201 |
Drawings - Views |
---|
Resolved the missing prompt on an iAssembly/iPart Parts List, when the associative drawing view target member is changed to a different member. INVGEN-33802 |
Resolved issue Include 3D sketch is disabled, and cannot be selected after using Replace Model References. INVGEN-33855 |
Resolved issue preventing the section depth line from being removed after creating a section view. INVGEN-34310 |
Resolved issue causing Inventor drawing file size to increase unexpectedly when updating and saving with a DWG underlay. INVGEN-34576 |
Improved stability when working with Update All Sheets in drawings. INVGEN-35007 |
Improved stability when activating a second drawing sheet. INVGEN-36974 |
Fixed a stability issue that inventor crashes when you edit a break out view and enable show hidden edges. INVGEN-37772 |
Parameters |
---|
Improved stability when editing parameters in a Parameters table. INVGEN-35744 |
Parts - Extrude-Revolve-Sweep-Coil |
---|
Resolved issue with sweep guide rails that worked in R2019 and not in R2020. INVGEN-32405 |
Resolved the translation issue for Return to XX in Korean Inventor. INVGEN-33893 |
Improved stability when deleting an extrude feature without consumed sketches. INVGEN-34389 |
Resolved issue where invisible intersect points incorrectly impact the Degree of Freedom value. INVGEN-36306 |
Parts - Fillet-Chamfer |
---|
Resolved the issue that the preview was incorrect when you edited a variable fillet in place. INVGEN-32157 |
Resolved the Fillet dialog issue where Automatic Edge Chain activates even though the option was "off" initially. INVGEN-34515 |
Parts - Hole-Threads |
---|
Resolved an issue where the size was not honored when changing to a different Thread standard in the Hole command. INVGEN-34487 |
Resolved issue where a hole size didn't update after changing to a different Thread standard in Hole command. INVGEN-36834 |
Improved stability when dragging the point of a hole to a projected point. INVGEN-37357 |
Parts - Sheet Metal |
---|
Improved the accuracy of the 2D Punch representation on a Flat Pattern INVGEN-36987 |
Parts - Surface |
---|
Improved stability when editing a Ruled Surface. INVGEN-34512 |
Platform - API |
---|
Resolved API issue about where PartsLists.Add did not respect the non-master Design View Representation Options. INVGEN-34771 |
OnSaveDocument now has the correct TopLevelSaveName when doing a Save Copy As. INVGEN-39151 |
Platform - Framework |
---|
Improved stability when invoking the Undo command multiple times. INVGEN-31988 |
Improved stability when closing Inventor with several documents open in different windows. INVGEN-32717 |
Resolved naming issue in the File Open dialog box where the initial character of a selected file entry would be overwritten when subsequent characters were typed. INVGEN-33553 |
Improved stability when working with the CAM addin. INVGEN-33807 |
Resolved issue causing a "no more memory is available" message to incorrectly display when editing a constraint in an assembly. INVGEN-34152 |
Improved stability when saving referenced files using Design Assistance. INVGEN-35420 |
Improved stability when saving a file while that is open in multiple Inventor sessions. INVGEN-36449 |
Platform - Graphics |
---|
Resolved issue where selection is lost when editing a component pattern. INVGEN-36836 |
Platform - Graphics - Face-Edge-Vertex-Silhouette |
---|
Resolved issue causing hidden edges to shift positions when saving files with a hidden edges visual style. INVGEN-35471 |
Platform - Graphics - Ray-Tracing |
---|
Resolved issue preventing a picture from being exported when Ray Tracing is enabled, and in the Image Save Options dialog box, the X and Y values are each specified as 5000. INVGEN-33430 |
Improved stability when working with the section view command. INVGEN-34678 |
Platform - Graphics - Section View-Decal-Thread |
---|
Improved stability when working with the section view command. INVGEN-33188 |
Resolved issue where a section plane was rendered when creating a section view with Mesh data. INVGEN-34179 |
Presentations |
---|
Resolved an issue that custom shortcut keys and marking menu view commands are not working in Presentations INVGEN-37196 |
Translators |
---|
Resolved translation issue causing JT surfaces to break after opening the file in Inventor. INVGEN-33898 |
Translators - DWF |
---|
Resolved issues causing DWF files exported from drawing files with poor quality. INVGEN-33614 |
Resolved issue preventing the export of Factory datasets to a dwf/dwfx file. INVGEN-34914 |
Translators - DWG-DXF |
---|
Resolved the issue that when you export an Inventor assembly to AutoCAD, multiple indexed entries are created for a single material. INVGEN-34262 |
Resolved issues with tolerance text height in DWG files exported from an Inventor .idw file. INVGEN-34676 |
Resolved the issue that Export flat pattern creates a zero length line segment in the polyline. INVGEN-34835 |
Translators - PDF |
---|
Fixed the quality issue that occurred when exporting a PDF document with an inserted Excel file. INVGEN-34035 |
Resolved an issue where exporting DWF or PDF from the Inventor Server results in incorrect colors. INVGEN-34269 |
UI |
---|
Improved stability when using the fillet round tool. INVGEN-36653 |
UI - Browser |
---|
Resolved issue preventing you from renaming the browser node of a Sheet Metal Part, when the name of the node was previously changed. INVGEN-34374 |
Resolved issue with continuous beep sound when using ENTER key to accept the constraint parameter value change in browser. INVGEN-36802 |
UI - Customization |
---|
Resolved issue where customized keyboard shortcuts would disappear in Inventor using import XML or input keys directly. INVGEN-35286 |