Weld Annotations in Drawings

Guidelines and options for adding welding symbols, caterpillars, and end fills.

You can use several types of weld annotations and symbols in a drawing.

Default appearance of weld annotations is determined by the weld symbol style and can be edited in Style and Standard Editor.

When you create drawing views of weldment assemblies, you can use the welding symbol from the model and automatically generate caterpillar annotations for solid body fillet welds.

You can also manually add 2D welding symbols, caterpillars, and end fills to drawing views of any model.

Note: Model Weld Annotation and Model Weld Symbols use the Weld Bead and Weld Symbol styles.
Tip: See the information about calculation of weld joints in Engineer's Handbook.

Documentation for weldment models

Weldments are a special type of assembly model that contains four states: preparations, welds, machining, and modeling. In a drawing, you can add views for any of the assembly states:

Note: Only the assembly state can be active when you create drawing views. If the weldment is "rolled back" to one of the other states, a message informs you.

Guidelines for using model weld annotations in drawings

Model weld annotations and symbols used in a drawing view are associated with the model and can update when the model changes. If you create a manual annotation or welding symbol in the drawing, and the model contains a welding symbol or annotation, the drawing welding symbol or annotation is a copy and does not update.

To create welding symbols and annotations that update when the model welding symbol and annotations change, right-click a drawing view and click Get Model Annotations, and then select Get Welding Symbols. Repeat and select Get Weld Annotations.

Adding weld annotations to a drawing view

You can manually add welding symbols, caterpillars, and end fills to any edge in a drawing view.

To create welding symbols and annotations that update when the model welding symbol and annotations change, right-click a drawing view and click Get Model Annotations, and then select Get Welding Symbols. Repeat and select Get Weld Annotations.