To Add or Edit Stitching Symbols (GOST Standard)

Add the stitching symbol to identify the type of stitched joint to use at a specific location on the drawing. Annotations can appear above and below the reference line and the leader line points to the stitching location.

Add stitching symbols in GOST drawings

  1. On the ribbon, click Annotate (ESKD) tabSymbols panelStitching Symbol . A plus (+) sign appears beside the cursor.
  2. In the graphic window, click the location on the drawing where you want to add the stitching symbol.
  3. Move the cursor to a different location. A leader line extends from the target to the cursor.
  4. Click to set a point.
  5. In the Stitching Symbol dialog box, add the desired stitch information.
  6. Expand the Stitching Symbol dialog box.
  7. In the Symbol section, click the All-around symbol to add the annotation, if needed.
  8. In the Requirement section, add all requirements that apply to the stitched joint.
  9. Click OK to add the symbol and annotation.

Edit or delete stitching symbols

  1. To edit a symbol, double-click the symbol to launch the dialog box, or by right-click to display a context menu and select the edit option.
  2. To delete a symbol, click the symbol to highlight it, and press the Delete key on the keyboard.