Display primary and alternate units in drawings

Drawing dimensions and notes display values in the primary measurement units specified in the dimension style or in the part file. If appropriate, set dimensions and notes to display dimension values also in alternate units.

Dimensions and notes can display values both in primary and in alternate measurement units. You select the display options to control the appearance of dual dimensions.

Display or hide alternate units

  1. Open a drawing.
  2. Click Manage tab Styles and Standards panel Styles Editor .
  3. Expand the Dimension styles list and click the dimension style to edit.
  4. On Alternate Units tab, specify the setting for alternate units: Specify the measurement units, dimension formatting, and display. Then select each type of annotation (Dimensions, Hole Notes, Chamfer Notes, Bend Notes, and Punch Notes) and specify the appearance of the dual format.
    Tip: To hide the alternate units for the selected type of annotation, select the Primary Units Only option.
  5. Click Save to save the change, and Done to close the dialog box.
Note: If a dual unit format is selected, precision and tolerance values are also displayed in the dual format.

Use part units or primary units from the style

  1. Open a drawing.
  2. Click Manage tab Styles and Standards panel Styles Editor .
  3. Expand the Dimension styles list and click the dimension style to edit.
  4. On Notes and Leaders tab, select Hole Note, Bend Note, or Punch Note Setting.
    Note: The change applies only to the selected type of drawing annotation.
  5. Select Part Units to display values in units specified in the part file. Clear the Parts Units check box to use units specified on the Units tab of the dimension style.
  6. Click Save to save the change, and Done to close the dialog box.
Note: The Part Units option overrides the setting for primary units on the Units tab. Secondary units always respect the unit setting on the Alternate Units tab.