Use the Pipe Run Profile Settings dialog box to refine offsets and modify or create profile views for a pressure network.
- Select a pipe run in the pressure network. The Pressure Network Plan Layout tab opens.
- On the Pressure Network Plan Layout tab, click Profile panel Pipe Run Profile
Find.
The
Pipe Run Profile Settings dialog box opens.
- Specify the following information for the profile view:
- offset style (either at cut length or offset at fittings)
- offset reference profile
- offset distance
- whether to draw the profile in a new or existing profile view
- Click OK.
- If you chose to draw the profile in an existing profile view, you are prompted to select the profile in the drawing.
- If you chose to draw the profile in a new profile view, the
Create Profile View wizard opens.