LIMITS (Command)

Sets an invisible rectangular boundary in the drawing area that can limit the grid display and limit clicking or entering point locations.

The following prompts are displayed.

Lower-Left Corner

Specifies the lower-left corner for the drawing limits.

Upper right corner
Specifies a point in the drawing area that represents the opposite corner of the rectangular limits boundary.
On

Turns on limits checking. When limits checking is on, you cannot enter points outside the grid limits. Because limits checking tests only points that you enter, portions of objects such as circles can extend outside the grid limits.

Off

Turns off limits checking but maintains the current values for the next time you turn on limits checking.