TREX (Express Tool)

Combines the TRIM and EXTEND commands.

Obsolete. Trim objects by selecting them, or extend objects by selecting objects while holding down the Shift key. These options are available in the TRIM and EXTEND commands.

Command: TREX

Select cutting/boundary edges or press Enter for implied…

Select objects: Use an object selection method or press Enter for an implied selection set

Pick to TRIM/Shift+Pick to EXTEND/Undo: Select objects

Note: The following objects are invalid for cutting/boundary edges and are automatically filtered out during selection of cutting/boundary edges in TREX: blocks, attribute definitions, dimensions, 2D solids, 3D solids, 3D faces, points, 3D polylines, 3D meshes, pface meshes, traces, and shapes.

File

trex.lsp

Related Concepts

Related Reference