To Work With Creating Polysolids

Create a Polysolid

  1. Click Home tabModeling panelPolysolid. Find
  2. At the Command prompt, enter h (Height) and enter the height of the polysolid object.
  3. Enter w (Width) and enter the width.
  4. Specify a start point.
  5. Specify the next point. You can switch between straight and curved segments:
    • To create a curved segment, at the Command prompt, enter a (Arc) before specifying the next point.
    • To create a straight segment, enter L (Line) before specifying the next point.
  6. Continue to specify points until you have finished creating the object.
  7. To complete the object, press Enter or enter c (Close) to connect the start point to the endpoint.

Create a Polysolid From an Existing Object

  1. Click Home tabModeling panelPolysolid. Find
  2. At the Command prompt, enter o (Object).
  3. Select a 2D object such as a line, polyline, arc, or circle.

    A 3D polysolid is created using the current height and width settings. The original 2D object is deleted or retained, depending on the setting of the DELOBJ system variable.

Related Concepts

Related Reference