Creates a point object at the intersection of three planar segments in a point cloud.
Find
The appearance and size of the point is controlled by the PDMODE and PDSIZE system variables. If PDMODE is set to 0 or 1, at the start of this command, it is automatically changed to 35, for better visibility. You can change this setting after the point is created.
The following prompts are displayed.
- Specify the first plane
- Select a planar segment.
- Specify the second plane
- Select a different planer segment that intersects the first plane.
- Specify the third plane
- Select a third planer segment that intersects the previous two planes.
