To Create 2D Isometric Circles

  1. Do one of the following:
    • On the status bar, click Find.
    • At the Command prompt, enter ISODRAFT.
  2. Choose which isoplane orientation that you want to use: Left, Right, or Top.
    • Press F5 or Ctrl+E to cycle through the different isoplanes (recommended)
    • On the status bar, Isodraft button, click the dropdown arrow and choose an option
    • At the Isodraft prompt in the Command window, enter an option
  3. At the Command prompt, enter ELLIPSE.
  4. At prompt, enter i (Isocircle).

    The Isocircle option is available only when an isometric drawing plane is active.

  5. Specify the center of the isocircle.
  6. Specify the radius or diameter of the isocircle.
Note: The status bar icon changes depending on the current isoplane.