- Click
. Find - Select a closed object to revolve.
- To set the axis of revolution, specify one of the following:
- The start and endpoint. Click to points on the screen to set the axis orientation. The axis points must be on one side of the revolved object. The positive axis direction extends from the start point to the endpoint.
- The X, Y, or Z axis. Enter x, y, or z.
- An object. Select a line, a linear edge of a polyline segment, or the linear edge of a surface or solid.
- Press Enter. To create a 3D solid the angle must be 360 degrees. If you enter a smaller angle of revolution, a surface is created instead of a solid.