New Image Dialog Box

Use this dialog box to define the properties of the image that you want to create.

AutoCAD Properties

X, Y, and Z Coordinates: Specifies the X, Y, and Z AutoCAD coordinates that define the lower-left corner of the new image.
Scale: Specifies a numeric scaling factor for the new image.
Rotation: Specifies a rotation for the new image.
Pick <: Draws a frame for the image you want to create. This automatically sets the X,Y, and Z values, scale, and rotation of your new image.

Bitonal (1-bit): Limits your image to two colors.
Grayscale (8-bit): Limits your image to 256 shades of gray.
Indexed Color (8-bit): Limits your image to 256 different colors.
True Color (32-bit): Limits your image to 16.7 million colors.

Note: True Color uses more system resources.

Width: Displays the physical width of the image in pixels and the current units. You can use the list to choose other units of measurement.
Height: Displays the physical height of the image in pixels and the current units You can use the list to choose other units of measurement.
Density: Specifies a density (or resolution) for the image. This defines both the horizontal and vertical density.

Note: You should set this to the density value at which your images are scanned.
Show This Dialog: Uses the command line interface for future new images instead of this dialog.