Leader Settings Dialog Box

Annotation Type

Sets the leader annotation type. The type you select changes the QLEADER leader annotation prompt.

MText

Prompts you to create multiline text (mtext) annotation.

Copy an Object

Prompts you to copy a multiline text, single-line text, tolerance, or block reference object and connects the copy to the end of the leader line. The copy is associated with the leader line, meaning that if the copied object moves, the end of the leader line moves with it. The display of the hook line depends on the object copied.

Tolerance

Displays the Tolerance dialog box, which you can use to create a feature control frame to attach to the leader.

Block Reference

Prompts you to insert a block reference. The block reference is inserted at an offset from the end of the leader line and is associated to the leader line, meaning that if the block moves, the end of the leader line moves with it. No hook line is displayed.

None

Creates a leader with no annotation.

MText Options

The options are available only when the multiline text annotation type is selected.

Prompt for Width

Prompts you to specify the width of the multiline text annotation.

Always Left Justify

Left-justifies the multiline text annotation, regardless of leader location.

Frame Text

Places a frame around multiline text annotation.

Annotation Reuse

Sets options for reusing leader annotation.

None

Does not reuse leader annotation.

Reuse Next

Reuses the next annotation you create for all subsequent leaders.

Reuse Current

Reuses current annotation. This option is automatically selected when you reuse annotation after selecting Reuse Next.

Leader Line

Sets the leader line format.

Straight

Creates straight-line segments between the points you specify.

Spline

Creates a spline object using the leader points you specify as control points.

Arrowhead

Defines the leader arrowhead. The arrowheads are also available for dimension lines (DIMSTYLE command). If you select User Arrow, a list of blocks in the drawing is displayed.

Number of Points

Sets the number of leader points that QLEADER prompts you to specify before prompting for the leader annotation. For example, if you set the points to 3, QLEADER automatically prompts you to specify the annotation after you specify two leader points. Set the number to one more than the number of leader segments you want to create.

If you set the option to No Limit, QLEADER prompts for leader points until you press Enter.

Angle Constraints

Sets angle constraints for the first and second leader lines.

First Segment

Sets the angle of the first leader segment.

Second Segment

Sets the angle of the second leader segment.