To Specify a Grade or Slope Between Points on a Feature Line

Use to edit the grade/slope between two vertices on a feature line, survey figure, parcel line, or 3D polyline.

Specify grade, slope, point elevations, or elevation difference between points. For the selected segment, you specify the start point, the elevation, and the end point. Then specify the grade, slope, elevation or elevation difference.

  1. Click Modify tabEdit Elevations panelSet Grade/Slope Between Points Find.
  2. Select the feature line or other object.
  3. Select the start point of the segment you want to edit.
  4. Optionally, specify the elevation of the start point by entering an elevation or by entering Surface and selecting a surface to obtain the elevation from.
  5. Select the end point of the segment.
  6. Do one of the following to establish the grade or slope between the points:
    • Enter a grade.
    • Enter Slope and specify a slope.
    • Enter Elevation and specify an elevation for the end point.
    • Enter Difference and specify an elevational difference between the two points.