Custom Attributes

Use the Parameter Editor to assign custom attributes to objects, modifiers, materials, and animation tracks.

A custom attribute is an additional, abstract parameter; abstract in the sense that it does not directly extend the functionality of the object by default. It affects an object only after wire parameters, reaction controllers, or expression controllers are set up to connect the custom attribute to another parameter in the scene. You can also use custom attributes to store job-specific notes and data.

Custom attributes behave like other object parameters in several ways:

Each custom attribute parameter can be one of a number of different data types, including integers, floating numbers, Booleans, arrays, nodes, colors, and texture maps. Parameters added to an object or modifier appear on a Custom Attributes rollout on the Modify panel. For each custom attribute parameter you create, you can specify the name, layout, value range, default value, and UI type: spinner or slider for floats and integers, checkbox for Booleans, etc.

As you customize an attribute, the result is displayed on the Testing Attribute rollout at the bottom of the dialog.

Note: If an object with custom attributes is placed in a container, those attributes are retained in the inherited container. The inheritor of the container can unlock attribute values and edit them locally, but any locally added attributes to the same definition will be lost upon updating the container.

Custom Attributes Special Features

The Custom Attributes feature offers an array of workflow-enhancing functionality, including:

Procedures

To add a parameter to an object:

  1. Select the object.
  2. Choose Animation menu Parameter Editor. If using the Enhanced menu system, you'll find Parameter Editor on the Attributes panel of the Animation menu.

    The Parameter Editor opens.

  3. Change settings as desired.
  4. Click Add.

    The parameter is added to the level specified in the Add To Type list. If an object has no custom attributes, Parameter Editor first adds a Custom Attributes entry to the current Add To Type level, and then adds the parameter to the Custom Attributes entry. If an object has more than one Custom Attributes entry as a result of collapsing its stack, the parameter is added to the first Custom Attributes entry.

    If a custom attribute parameter is assigned to an object or modifier, you can see and edit its value on the Modify panel after adding it by activating the entity to which the attribute is assigned. If the custom attribute is assigned to a material, it's available for that material in the Material Editor, on the Custom Attributes rollout. To access a parameter that's assigned to an animation track, open Track View, highlight the track's Custom Attributes entry, and then right-click and choose View Attribute Dialog.

To edit a parameter or custom attribute:

  1. Select the object.
  2. Open Parameter Editor.
  3. From the Add To Type drop-down list, choose the type of parameter to edit, and then click Edit/Delete.

    The Edit Attributes/Parameters dialog opens.

    Note: If you chose Add To Type Picked Track, the Track View Pick dialog might open first to prompt you to choose the animation track whose attribute to edit.
  4. In the Edit Attributes/Parameters dialog, highlight the parameter to edit.

    Its settings appear in the Parameter Editor.

  5. Change the settings in the Parameter editor, and then click Accept Parameter changes.
  6. With multiple parameters or custom attributes, to change the ordering, click the entity to move, and then use the up and down arrow buttons to move the entity in the list. Moving a Custom Attributes entry also moves its parameters.
    Note: You cannot rename a Custom Attributes entry.
  7. When finished editing, click Apply Changes, and then exit the dialog by clicking the Close or Cancel button.

To delete a custom attribute or parameter:

  1. Select the object.
  2. Open the Parameter Editor.
  3. From the Add To Type drop-down list, choose the type of parameter to delete, and then click Edit/Delete.

    The Edit Attributes/Parameters dialog opens.

    Note: If you chose Add To Type Picked Track, the Track View Pick dialog might open first to prompt you to choose the animation track from which to delete the attribute.
  4. In the Edit Attributes/Parameters dialog, highlight the parameter to delete, and then click Delete Parameter. Alternatively, to delete all parameters under the same Custom Attributes heading as the highlighted parameter, click Delete All Parameters.

    To delete one or more custom attributes instead, click a Custom Attributes heading, and then click Delete Attribute or Delete All Attributes. Multiple attributes can result from collapsing an object's stack with Preserve Custom Attributes on. For example, one set of custom attributes might be applied to an object and a second set of attributes assigned to one of its modifiers. Collapsing such an object results in two sets of custom attributes.

  5. Click Apply Changes, and then close the dialog by clicking its Close box or the Cancel button.

Interface

The Parameter Editor takes the form of a dialog with three rollouts: The first rollout sets general options for the attribute; the central rollout sets options for the current parameter type; and the third lets you preview the attribute user interface (UI).

Attribute rollout

Add to Type group
Add to Type list
Choose whether the custom attribute is assigned to the selected object, its active modifier (as highlighted in the modifier stack), its material, or a picked track. Also use this drop-down list to choose the attribute type to delete or edit.

If the text “Pick Explicit Track” appears in the box below the drop-down list before you choose Picked Track, the Track View Pick dialog appears showing the Track View hierarchy. Expand the hierarchy as necessary, click the track to add the attribute to, and then click OK.

Note: If you choose Selected Object's Current Modifier and multiple modifiers are highlighted in the stack when you click Add, Parameter Editor applies the custom attribute to the first modifier you highlighted and removes the highlighting from the other modifiers.
Pick Explicit Track
Click this button to open a Track View hierarchy window from which to choose an animation track. Navigate the hierarchy to find the desired track, highlight the track, and then click OK. The controller information for the track then appears in the text box to the right of the button, and the Parameter Editor will then use this track for adding or editing custom attributes and parameters.
Add/Edit/Delete group
Add
Applies the custom attribute parameter to the current object, modifier, material, or track, depending on the current choice in the Add To Type list.

If a custom attribute parameter is assigned to an object or modifier, you can see and edit its value on the Modify panel after adding it by activating the entity to which the attribute is assigned. If the custom attribute is assigned to a material, it's available for that material in the Material Editor. To access a parameter that's assigned to an animation track, open Track View, highlight the track's Custom Attributes entry, and then right-click and choose View Attribute Dialog.

Edit/Delete
Opens the Edit Attributes/Parameters dialog.

This dialog displays a list of all of the custom attribute parameters assigned to the current object at the current level. Dialog behavior is described in these two procedures: To edit a parameter or custom attribute and To delete a custom attribute or parameter.

Parameter Type group
Parameter Type
Use the drop-down list to choose the data type for the current parameter. The following list includes links to the sections describing the UI settings for each parameter's data type:
UI Type group
UI Type
Selects the type of UI element that controls the parameter.

The UI types available depend on which parameter type you specify. For example, float and integer values are controlled by spinners or sliders, and Boolean values by checkboxes or check buttons. Array values are always controlled by drop-down lists, node values by pick buttons, color values by color pickers, and texture map values by map buttons.

Full descriptions of each UI Options rollout follow, and the list of parameter types, above, includes links to the respective UI Options rollout descriptions.

Name
The name of the parameter. Parameter Editor gives the parameter the default name Param#, with # being a number. Change the name by editing this field.

Angle/Float/Integer/Percent/WorldUnits UI Options rollout for spinners

These are the options for a standard spinner control that sets either a whole-number (integer) value or a real-number (angle, float, percent, World units) value.

Size group
Width
Sets the width of the spinner.
Range group
From
Sets the minimum value of the spinner.
To
Sets the maximum value of the spinner.
Default
Sets the default value of the spinner.
Alignment group
Left/Right/Center
Sets the alignment of the spinner in the rollout.
Offsets X/Y
Fine-tune the position of the spinner on the horizontal and vertical axes.

Angle/Float/Integer/Percent/WorldUnits UI Options rollout for sliders

These are the options for a standard slider control that sets either a whole-number (integer) value or a real-number (angle, float, percent, World units) value.

Size group
Width
Sets the width of the spinner.
Range group
From
Sets the minimum value of the spinner.
To
Sets the maximum value of the spinner.
Default
Sets the default value of the spinner.
Alignment group
Left/Right/Center
Sets the alignment of the spinner in the rollout.
Offsets X/Y
Fine-tune the position of the spinner on the horizontal and vertical axes.
Orientation And Ticks group
Vertical
When on, the slider will be displayed vertically. When off, the slider is displayed horizontally.
Ticks
Sets the number of ticks along the slider. The ticks are distributed evenly along the length of the slider.

Boolean UI Options rollout for checkboxes

These are the options for a standard 3ds Max checkbox that the user can turn on and off by clicking it with the mouse.

Size group
Width
Sets the width of the checkbox.
Height
Sets the height of the checkbox.
Alignment group
Left/Right/Center
Sets the alignment of the checkbox in the rollout.
Offsets X/Y
Fine-tune the position of the checkbox on the horizontal and vertical axes.

Boolean UI Options rollout for check buttons

These are the options for a standard 3ds Max check button that the user can turn on and off by clicking it with the mouse.

Size group
Width
Sets the width of the check button.
Height
Sets the height of the check button.
Alignment group
Left/Right/Center
Sets the alignment of the check button in the rollout.
Offsets X/Y
Fine-tune the position of the check button on the horizontal and vertical axes.
Check Button Options group
Highlight Color
Sets the color of the button when it is clicked.

Array UI Options rollout for drop-down lists, combo boxes, and list boxes

Thess are the options for controls that let the user choose a named option from a list. The options for the three Array UI types are the same; they differ in how they appear on the Custom Attributes rollout. The types are:

  • Drop-Down List: Only the current choice is visible by default. The user clicks the field to open the list and then clicks to choose a different item.
  • ComboBox: Displays an editable field above a list box. The user clicks to choose from the list, or edits the field.
  • ListBox: Displays a list. The user clicks the desired item; the highlighting indicates the current choice.
Size group
Width
Sets the width of the list.
Height
Sets the height of the list.
Alignment group
Left/Right/Center
Sets the alignment of the drop-down list in the rollout.
Offsets X/Y
Fine-tune the position of the array list on the horizontal and vertical axes.
Array group
Item name
Lets you enter a name into the list.

Click Add Item to add the name to the array list. To remove an item, highlight its name and click Delete Item. Click Clear Array to remove all items from the list.

[array list]
Displays the contents of the list.

The item at the top of the array list is the default selection.

Node UI Options rollout for pick buttons

A node is any object in the 3ds Max scene. The Node UI element creates a button that, when clicked, lets the user pick a scene node other than the one to which the attribute is attached. After selecting the node, its name appears on the button.

Size group
Width
Sets the width of the pick button.
Height
Sets the height of the pick button.
Alignment group
Left/Right/Center
Sets the alignment of the pick button in the rollout.
Offsets X/Y
Fine-tune the position of the pick button on the horizontal and vertical axes.

Color UI Options rollout for color swatches

This creates a color swatch that displays the current color and lets the user click it to choose a new color with the Color Selector dialog.

Size group
Width
Sets the width of the color picker.
Height
Sets the height of the color picker.
Alignment group
Left/Right/Center
Sets the alignment of color picker in the rollout.
Offsets X/Y
Fine-tune the position of the color picker on the horizontal and vertical axes.
ColorPicker Default Color group
Default Color
Sets the default color of the color picker.

Material/TextureMap UI Options rollout for material and map buttons

The options for the Material UI type (MaterialButton) and TextureMap UI type (MapButton) are the same. The difference is that, when the user clicks the resulting button to open the Material/Map Browser, the former displays only materials and the latter displays only maps.

Size group
Width
Sets the width of the material/map button.
Height
Sets the height of the material/map button.
Alignment group
Left/Right/Center
Sets the alignment of the material/map button in the rollout.
Offsets X/Y
Fine-tune the position of the material/map button on the horizontal and vertical axes.

String UI Options rollout for text boxes

The String parameter type creates a text box that the user can edit with the keyboard, with optional default text.

Size group
Width
Sets the width of the material/map button.
Height
Sets the height of the material/map button.
Alignment group
Left/Right/Center
Sets the alignment of the text box in the rollout.
Offsets X/Y
Fine-tune the position of the text box on the horizontal and vertical axes.
Label group
Label above text box
When off, the label (parameter name) appears to the left of the text box. When on, the label appears above the text box.
EditText Default Text group
Default Text
Enter any default text that should appear in the box before the user edits it.

Testing Attribute rollout

This rollout displays the UI layout for the custom attribute that you are working on. It updates continuously so that you can see how different settings in the various rollouts affect the UI display of the attribute.

The UI element is operational in this rollout in the sense that it can be moved, clicked, toggled, and so on.