May 5, 2015

In our continuing efforts to provide high quality products, Autodesk has released Update 1 for Inventor 2016 which addresses multiple issues (see Description below).

This document contains the latest information regarding the installation and use of this update. It is strongly recommended that you read this entire document before you apply the update to your product. For reference, you should save this document to your hard drive or print a copy.

Contents

• Description of the Issues
• System Requirements
• Installation Instructions

Return to Top

Update 1:

• 31296, 45150: Center of Gravity becomes visible and cannot be turned off

• 53079: Empty browser is visible on left of My Home at start up

• 54816: Inserting identical component as AnyCAD associative reference inserts a completely different model

• 59388: Unexpected exit when Right Mouse Button in new Presentation

• 53221: Files saved in SolidWorks2015 SP2 cannot be openned

• 59105: Unexpected exit on close if load Mesh add-in enabled

• 60101: Unexpected Exit when users sync Point Cloud model to AutoCAD by Sync AutoCAD command in Factory Inventor

• 56844: Edit section sketch not working properly

• 53433: Unexpected exit on closing Inventor if Insert Catalog Part add-in loaded

• 55190: Some unrelated sketches are blocked from inclusion in derived workflow

• 60587: Unable to edit view orientation after disabling "Orient from base" or "Align to Base" option

• 35674: Poor quality of embedded Excel table in drawing when save as PDF

• 58768: Print Studio fails to launch when Windows Explorer is set to hide file extensions

• 59300: Unnecessary memory consumption in flat pattern drawings

• 56191: The preview of Mate and Flush constraints in Assemble command are mismatched

• 56035: Unable to update style from library for materials and appearances after modifying

Return to Top

For application of this Update, your system must have Inventor from one of the following products installed:

• Autodesk® Inventor® Professional 2016
• Autodesk® Inventor® 2016
• Autodesk® Factory Design Suite Premium 2016
• Autodesk® Factory Design Suite Ultimate 2016
• Autodesk® Product Design Suite Premium 2016
• Autodesk® Product Design Suite Ultimate 2016

Return to Top

This update is available in 64bit version and is only applicable to Autodesk Inventor 2016. Once installed, it will appear as an update under Add/Remove Programs and can be uninstalled from there.

1. Update your operating system before you install this Autodesk Inventor 2016 Update. Reboot your system after the updates are installed.
2. Download the Update.
3. Double click the .exe file downloaded in step 2 to install this update on each system running Autodesk Inventor 2016.
4. Choose Next to begin the install...
5. Once finished you'll receive the Autodesk Inventor 2016 Setup dialog box stating that the update has been successfully applied.
6. Click Finish to complete the installation and exit the dialog box.

Return to Top

We thank all our customers who identified these issues and reported them to us. These reports give us the opportunity to improve the product and provide you with the best solution in mechanical design. We also thank you for your continued business and for feedback regarding the content of this update release.

Respectfully,

Autodesk Inventor Product Team

Return to Top

Copyright ^© 2015 Autodesk, Inc.