September 9, 2015

In our continuing efforts to provide high quality products, Autodesk has released Update 2 for Inventor 2015 Service Pack 2 which addresses multiple issues. This Update is cumulative, previous Updates are not prerequisites (see Description below).

This document contains the latest information regarding the installation and use of this update. It is strongly recommended that you read this entire document before you apply the update to your product. For reference, you should save this document to your hard drive or print a copy.

Contents

• Description of the Issues
• System Requirements
• Installation Instructions

Return to Top

Update 1:

• 51642: Content Center standard parts fail with error on Refresh

• 46214: Incorrect drawing view representation of tapped holes made in assembly

• 58347: Not possible to turn on visibility of specific constraint types

• 35674: Poor quality of embedded Excel table in drawing when save as PDF

• 64720: Flat Pattern does not display the edges of split faces in select components

• 50165: Section view in weldment without machining shows inconsistent dimension

• 64585: Screen flicker when Job Processor is running

• 61389: Inconsistent behavior in Sketch blocks and Joints

• 68144: Rotated Excel text is printed as horizontal - PDF and DWF

• 49198: Title block incorrect after saving drawing as AutoCAD dwg

• 30576: Incorrect attach point of extension line when creating Hole Note in section view

• 59733: Unexpected lines show when Inventor DWG opened in AutoCAD

• 31292: Flush option not working as expected with Grip Snap

• 72385: Unable to retrieve Angular dimension in drawing

• 75880: Unable to set alpha channel option when writing out png file

• 1507-400: Mini-Toolbar not displaying parameter name for User workplane in Part

Update 2:

• 51642: Content Center standard parts fail with error on Refresh

• 51992: Solid hatch from sketch OK in drawing view but can't be printed or exported to PDF

• 67427: Poor performance when deleting drawing dimension

• 49974: Unexpected exit after Resolve dialog is dismissed

• 73089: Unexpected exit when creating drawing sketch

• 76602: Unexpected exit when updating a derived part

• 57650: Unexpected exit when opening part file

• 69723, 53966: Unexpected exit with API ReplaceReferences on OLE references

• 27414: Unexpected exit when edit work plane and switch active window

• 53048: Unexpected exit after moving the End of Part marker

Return to Top

For application of this Update, your system must have Inventor from one of the following products installed:

• Autodesk® Inventor® Professional 2015
• Autodesk® Inventor® 2015
• Autodesk® Factory Design Suite Premium 2015
• Autodesk® Factory Design Suite Ultimate 2015
• Autodesk® Product Design Suite Premium 2015
• Autodesk® Product Design Suite Ultimate 2015

Return to Top

This update is available in 32bit and 64bit versions and is only applicable to Autodesk Inventor 2015 Service Pack 2. If you do not have Service pack 2 please download and install prior to installing this Update. Once installed, it will appear as an update under Add/Remove Programs and can be uninstalled from there.

1. Update your operating system before you install this Autodesk Inventor 2015 Service Pack 2 Update. Reboot your system after the updates are installed.
2. Download the appropriate version of the Update; either the 32-bit or 64-bit version depending upon your operating system bit type.
3. Double click the .msp file downloaded in step 2 to install this update on each system running Autodesk Inventor 2015 Service Pack 2.
4. Choose Next to begin the install...
5. Once finished you'll receive the Autodesk Inventor 2015 Setup dialog box stating that the update has been successfully applied.
6. Click Finish to complete the installation and exit the dialog box.

Return to Top

We thank all our customers who identified these issues and reported them to us. These reports give us the opportunity to improve the product and provide you with the best solution in mechanical design. We also thank you for your continued business and for feedback regarding the content of this update release.

Respectfully,

Autodesk Inventor Product Team

Return to Top

Copyright ^© 2015 Autodesk, Inc.