January 8, 2015

In our continuing efforts to provide high quality products, Autodesk has released Update 2 for Inventor 2015 Service Pack 1 which addresses multiple issues (see Description below). This Update is cumulative, previous Updates are not prerequisites.

This document contains the latest information regarding the installation and use of this update. It is strongly recommended that you read this entire document before you apply the update to your product. For reference, you should save this document to your hard drive or print a copy.

Contents

• Description of the Issues
• System Requirements
• Installation Instructions

Return to Top

Update 1:

• 1517-410: Drawing view and browser does not honor current assembly state

• 1519-184: Content Center library migration looses Material reference

• 31290: Counterbore depth value missing when using specific thread sizes

• 28472: STEP file created from a weldment shows beads incorrectly

• 27830: Error when publishing DWF file

• 27853: Drawing dimension extension line missing

• 1480-754: Embed Decals are omitted during visualisation file generation via Update View and/or Job Server

• 31109: Inventor hangs when saving a file after expand and collapse the browser

• 35166: Crop View can't be deleted when annotations are unattached

• 34990, 32689: A-Side definition error from migrated sheetmetal iPart with Flat Pattern

• 26526: Slow preformance of drawing view creation when placing design data shared on network

• 33256: slow performance of drawings with Multibody part views

• 1518-683, 1514-070, 33512, 27575: General performance enhancements

Update 2:

• 33538: Some defined Assembly Joint Limits are unexpectedly lost during compute with large amount of Joints present

• 27752: Relative path for Material & Appearance libraries is not supported in Project setting

• 39317: Bill Of Materials order is incorrect

• 26526: Poor performance when creating drawing views

• 27717: Physical iProperties are not calculated for large models containing rectangular pattern

• 39685: Physical iProperties are not calculated depending on End Of Part marker placement

• 39695: Hatch pattern AR-CONC does not scale correct after AutoCAD DWG export

• 41234: No view lines on Vault created dwfs

• 28743: Elements of the drawing get lost when batch generating visualization files with Vault Job Processor

• 40516: Regions/Scans created in ReCap do not show up in Inventor point cloud Navigator dialog

• 34808, 39324: Missing or moved entities when exported as STEP file

• 41918: No results for Automatic Contact or Mesh when creating stress analysis

• 31416: Stability enhancement

• Improved GPU performance for VMWare

Return to Top

For application of this Update, your system must have Inventor from one of the following products installed:

• Autodesk® Inventor® Professional 2015
• Autodesk® Inventor® 2015
• Autodesk® Factory Design Suite Premium 2015
• Autodesk® Factory Design Suite Ultimate 2015
• Autodesk® Product Design Suite Premium 2015
• Autodesk® Product Design Suite Ultimate 2015

Return to Top

This update is available in 32bit and 64bit versions and is only applicable to Autodesk Inventor 2015 Service Pack 1. If you do not have Service pack 1 please download and install prior to installing this Update. Once installed, it will appear as an update under Add/Remove Programs and can be uninstalled from there.

1. Update your operating system before you install this Autodesk Inventor 2015 Service Pack 1 Update. Reboot your system after the updates are installed.
2. Download the appropriate version of the Update; either the 32-bit or 64-bit version depending upon your operating system bit type.
3. Double click the .msp file downloaded in step 2 to install this update on each system running Autodesk Inventor 2015 Service Pack 1.
4. Choose Next to begin the install...
5. Once finished you'll receive the Autodesk Inventor 2015 Setup dialog box stating that the update has been successfully applied.
6. Click Finish to complete the installation and exit the dialog box.

Return to Top

We thank all our customers who identified these issues and reported them to us. These reports give us the opportunity to improve the product and provide you with the best solution in mechanical design. We also thank you for your continued business and for feedback regarding the content of this update release.

Respectfully,

Autodesk Inventor Product Team

Return to Top

Copyright ^© 2015 Autodesk, Inc.