Fill Analysis Quick Start Tutorial

In this tutorial, you simulate the filling phase in a part. The feed system is not included. The filling phase is the most important phase of the injection molding cycle. If there are problems with the filling of a part, the part quality is not optimal. In this tutorial, you will do the following:

  1. Create a project.

  2. Import a model.

  3. Set the injection location.

  4. Select the material and analyze.

  5. Review results.

  6. Move the gate.

  7. Compare results.

Before you begin, click here to download the model files for all the quick start tutorials.

When you are ready, click here to start the tutorial.