Meshing ProblemLock-up during Automatic Mesh Sizing

Mar 3, 2012

Issue:

The User Interface locks up after Automatic Mesh Sizing is started. The only way to recover is to kill the process using Task Manager.

Solution:

Solution

An Antivirus program was running, and was interfering with the Automatic Mesh Sizing process. After disabling the Antivirus program (temporarily), the user was able to apply Automatic Mesh Sizing. Be sure to re-enable the virus program. Check with your Systems Administrator for assistance.

Products:

Simulation CFD

Versions:

2010;2011;2012;2013;2014

Discuss