In order to transfer a Robot model to Revit:
- In Robot, click Add-Ins Integration Autodesk Revit Structure. The Integration with Revit Structure dialog opens.
- Select Send model to send Robot model only, or Send model and results if you want to send the model and its associated results.
- Click Send options.
The Integration with Revit Structure - Send Options dialog opens.
- Specify the scope and transfer options, and then click OK.
- Click OK to start the transfer.
If you select Send to the intermediate file (.smxx), the Save as dialog displays. Use this dialog to save a file in the intermediate file format (SMXX format).
Note: If you chose to Send model and results, and if results are already available in Robot, the Update Results dialog opens. Specify the necessary names and descriptions, and then click OK.
- In the Send Model to Revit Structure dialog, you can view the progress of the transfer (reading data from Robot, creating a Revit model, exporting elements and creating relevant elements in Revit).
- After sending the model is completed, the messages or warnings that appeared during the transfer process may display on the screen.
- Remarks
- The following structure elements are not transferred from Robot to Revit:
- curved beams and walls
- openings in walls and slabs
- rigid links
- loads defined in Robot.