Flame InfoBytes: Stone+Wire - Adding high-speed interface for S+W

Autodesk Support

May 4, 2017

This video link below covers the steps with the following workstation info:

  • Hostname - "bmw"
  • 1Gig - "10.1.1.1"
  • 10Gig - "172.16.1.1"

For best practice it's not needed to add all remote workstations to all the sw_framestore_map files at your facility, only the local workstation need to be filled in.

Script version is also available with instructions at: https://knowledge.autodesk.com/community/article/94051

Advanced info - The auto-discovery mechanism for stone and wire services communicates over multicast address 224.0.0.1/4, so all workstations will share the information in their own sw_framestore_map file with other remote systems.  If you're experiencing issues where auto-discovery is not working, please check if you have a gateway defined interface, if not (security reasons) it's possible to statically define a routing table entry. 

 Example:

    # ip route add 224.0.0.1 via <house_network> [dev ifname]

 

 

 


Was this information helpful?

Need help? Ask the Autodesk Assistant!

The Assistant can help you find answers or contact an agent.

Ask the Assistant

What level of support do you have?

Different subscription plans provide distinct categories of support. Find out the level of support for your plan.

View levels of support