About System Requirements and File Compatibility

Dec 19, 2014  |  In-Product View

Review the minimum requirements, and the security and firewall checklists.

Autodesk BIM 360 Glue

  • Windows 7/8 Operating system
  • Intel Processor 1.8 MHz
  • RAM ‐ 2 GB
  • Intel GMA (integrated) or 64 MB Video RAM (dedicated)

Mobile Access on the iPad

  • iPad 2 or later, iPad Air and iPad Mini. For higher quality, iPad 3 or later recommended.
  • iOS 7 or later.

Web Access Supported Browsers

  • Google Chrome
  • Firefox
  • Internet Explorer 9 and 10

For more information, see System Requirements: Glue Web Access.

Security and Firewall Checklist

    Ensure the following conditions are met:

  • Internet Explorer is not blocking scripts.
  • The following urls are in the firewall's safe list: https://b1.autodesk.com, https://b2.autodesk.com, https://b3.autodesk.com, and https://b4.autodesk.com
  • Standard TCP/UDP/IP ports 80 and 443 are not blocked.
  • https://b2.autodesk.com, https://b3.autodesk.com, and https://b4.autodesk.com bypass the filter group and the traffic shaper in the content filter, bandwidth management, and application control software.
  • Local network & security policies do not block scripts, Web applications and Silverlight/flash applications (or allow these for https://b2.autodesk.com, https://b3.autodesk.com, and https://b4.autodesk.com).

Microsoft .NET Framework 4.5

When accessing BIM 360 Glue, Microsoft .NET Framework 4.5 is automatically installed. If you would like to install this prior to rolling out BIM 360 Glue, you can download it here: Microsoft .NET 4.5.

File Compatibility

In BIM 360 Glue, you can upload and view more than 50 file types.

You can also send your models directly from Autodesk Revit (RVT), Autodesk AutoCAD/AutoCAD Civil 3D (DWG), and Autodesk Navisworks (NWD) using the BIM 360 Glue add-ins .

For a complete list of file formats supported in Autodesk BIM 360 Glue, see Autodesk BIM 360 Glue File Compatibility.

Note: If you add Revit models using the Upload button or drag and drop, you can't use them in coordination. To view and coordinate your Revit models, download the Revit add-in.

Discuss