Use the template

Create a drawing using the template containing the title block.

  1. If AEGS is not the active project, in the Project Manager, right-click AEGS and select Activate.
  2. In the Project Manager, click the New Drawing tool.
  3. In the Create New Drawing dialog box, specify:

    Name: AEGS11

    Description 1: Title Block

    Description 2: Exercise

  4. Click Browse next to the Template edit box.
  5. In the Select template dialog box, select AEGS_ELECTRICAL.dwt, and click Open.
  6. In the Create New Drawing dialog box, click OK.
  7. On the Apply Project Defaults to Drawing Settings dialog box, click No.

    Project Manager creates the drawing using the template containing the title block.