Title Block Update

Update the title block attributes with the mapped AutoCAD Electrical values.

  1. If AEGS is not the active project, in the Project Manager, right-click AEGS and select Activate.
  2. In the Project Manager, double-click to expand the AEGS project.
  3. Double-click drawing AEGS11 to open it.
  4. Click Project tabOther Tools panelTitle Block Update. Find

    The Update Title Block dialog box displays.

  5. Select the project and drawing values to update on the title block.
    • LINE1
    • LINE2
    • LINE4
    • LINE6
    • Drawing Description: 1 and 2
    • Drawing (%D value)
    • Sheet (%S value)
    • Sheet maximum
    • Resequence sheet %S values: 1
  6. Click OK Project-Wide.
  7. Select drawings AEGS01 through AEGS05, and AEGS11 to process. Click Process v.
    Note: Drawings AEGS01 through AEGS05 are supplied with the WD_TB attribute on the title block for this exercise.
  8. Click OK.