Autodesk Network License Manager IPv6 Support Readme for 64-bit Windows
This Readme
contains information about downloading and updating the Autodesk Network
License Manager files required for IPv6 support.
Contents
Supported
Operating System
- Microsoft® Windows® Server 2008 and 2008
R2 64-bit
- Microsoft® Windows® Server 2012 64-bit
- Windows 7 64-bit
- Windows 8 / 8.1 64-bit
Downloading
and Updating IPv6 Support Files
You must already have the Autodesk Network License Manager installed in
order to apply the IPv6 Support update. If you do not already have the Autodesk
Network License Manager installed on your server, refer to the Network Licensing Guide in
the Help system for installation instructions.
To download the IPv6
Support software
Before you can perform any system maintenance on your license server,
including updates, you must stop the license server. When you have completed
the update, you must restart the license server.
- Download the nlm11.12_ipv6_win64.exe
file to your desktop.
To stop the Network
License Server
You should be logged in with Administrator rights when working with the
LMTOOLS utility.
- Right-click the LMTOOLS icon on the
desktop and click Run As Administrator.
- In the LMTOOLS program, click the
Start/Stop/Reread tab.
- On the Start/Stop/Reread tab, click Stop
Server, wait 15 seconds, and then proceed.
- Close lmtools.exe.
- Locate the existing installed Autodesk
Network License Manager files: lmtools.exe,
lmutil.exe,
lmgrd.exe,
and adskflex.exe. Their
default location is C:\Program
Files\Autodesk Network License Manager\.
- Create a back-up copy of the existing
Network License Manager files.
To update the
Autodesk Network License Manager for IPv6
- Double-click the nlm11.12_ipv6_win64.exe
file on your desktop. The IPv6 Support files, lmtools.exe, lmutil.exe, lmgrd.exe, and adskflex.exe, are
extracted to C:\install\Autodesk\NLMIPv6Support_Win64.
- Copy the new IPv6 Support files from C:\install\Autodesk\NLMIPv6Support_Win64 to the location where your existing
Autodesk Network License Manager is installed.
- When prompted to replace the existing
files, click
Yes.
To restart the Network
License Server
You should be logged in with Administrator rights when working with the
LMTOOLS utility.
- Right-click the LMTOOLS icon on the
desktop and click Run As Administrator.
- In the LMTOOLS program, click the
Start/Stop/Reread tab.
- On the Start/Stop/Reread tab, click
Start Server.
- Close lmtools.exe.
Feature Notes
Environment
- Autodesk 2015 products can obtain license only from 2015 compatible version of Network License Server – v11.12. Lower versions of Network License Server cannot serve license to 2015 products. It was recommended in the past as well to upgrade the license servers each year to the latest version, but from 2015 onwards this has been made compulsory.
Copyright ® 2013 Autodesk, Inc.