August 15, 2014
In our continuing efforts to provide high quality products, Autodesk has released Update 6 for Inventor 2013 Service Pack 2 which addresses multiple issues (see Description below). This Update is cumulative, previous Updates are not prerequisites (See respective readme files for detail of issues addressed).
This document contains the latest information regarding the installation and use of this update. It is strongly recommended that you read this entire document before you apply the update to your product. For reference, you should save this document to your hard drive or print a copy.
Contents
1471-513: VBA DrawingCurves(ComponentOccurrence) method fails on specific drawing view
1518-199: The setting of template for assembly in make component configuration is not retained
1518-155: Select a point of sketch is disabled after edit the sketch
1517-471: Moment of Inertia is calculated to negative value
1518-347: Unable to add features to data after opening and closing multiple times in the same session
1518-402: Updating drawing corrupts section view
1420-905: Incorrect Master Mass is calculated when generating Shrinkwrap
1517-349: Unexpected exit updating second derived part after deleting the geometry in sketch block within the base part
1507-142: Unexpected exit in XLayerExternalResolver::ResolveFile() when running VBA
1518-794: Unexpected exit when working with part in non-English version after installing Update3
1480-054: Unexpected exit after IKM Import and dragging part
For application of this update, your system must have Inventor from one of the following products installed:
This update is available in 32bit and 64bit versions (downloaded together as one bundle) and is only applicable to Autodesk Inventor 2013 Service pack 2. If you do not have Service pack 2 please download and install prior to installing this Update. For installation on Windows 8.1 OS please read Technical Solution TS22238097. Once installed, it will appear as an update under Add/Remove Programs and can be uninstalled from there.
We thank all our customers who identified these issues and reported them to us. These reports give us the opportunity to improve the product and provide you with the best solution in mechanical design. We also thank you for your continued business and for feedback regarding the content of this update release.
Respectfully,
Autodesk Inventor Product Team
Copyright © 2014 Autodesk, Inc.