Autodesk® Robot™ Structural Analysis Professional and Autodesk® Robot™ Structural Analysis 360
2015 Service Pack 1 Readme

Thank you for downloading Service Pack 1 for Autodesk Robot Structural Analysis Professional or Autodesk Robot Structural Analysis 360.

This readme contains the latest information regarding the installation and use of this service pack. It is strongly recommended that you read this entire document before you apply the service pack to your licensed copy of the product.

Contents


Who Should Install This Service Pack?

This service pack is for the following Autodesk products running on all supported operating systems.

Be sure to download and install the correct service pack if downloaded from the Update and Service Packs web site.
(Autodesk Application Manager recognizes downloads and installs the right service pack automatically).

64-bit Products

Service Pack

Autodesk Robot Structural Analysis Professional

RSAPRO2015_X64_SP1.exe

Autodesk Robot Structural Analysis 360

RSA360_X64_SP1.exe

Return to Top

Installation Instructions

Apply This Service Pack to a Standalone Installation

Take the steps below to install this service pack.

  1. Download the service pack and save it to any folder.
  2. Find the folder where you saved the service pack and double-click the executable (EXE) file.
  3. If required, insert the product media (for example, the Autodesk Robot Structural Analysis Professional 2015 installation disc).

Return to Top

Apply This Service Pack to a Network Administrative Image (Deployment)

Both methods: 'Append' and 'Merge' may be used when creating the deployment with this Service Pack.

Return to Top

Uninstall This Service Pack

Windows 7

  1. From the Start menu (Windows), click Control Panel.
  2. Click Programs and Features.
  3. In the Programs and Features window, in the left pane, click View Installed Updates.
  4. Find the appropriate service pack in the list of updates. Click Uninstall.

Windows 8

  1. From the Start menu (Windows), click Control Panel.
  2. Click Programs and Features.
  3. In the Programs and Features window, in the left pane, click View Installed Updates.
  4. Find the appropriate service pack in the list of updates. Click Uninstall.

Return to Top

Primary Issues Resolved by This Service Pack

The following defects have been fixed in this service pack:

  1. Properties of the Eurocode Glue Laminated Timber classes have been adjusted according to the EN 14080:2013 code.
  2. Generation of the calculation notes and the improper application of the stiffness reduction coefficient (tau_b) for the Direct Analysis Method have been fixed.
  3. Issues concerning the Revit2Robot link such as the transfer of levels, loads, rigid links and code combinations have been fixed.
  4. Incorrect display of the Steel Design Calculations dialog has been fixed.
  5. Definition and verification of the Steel Splice Connection have been fixed.

Return to Top