Notice to Autodesk Inventor Customers
In our continuing efforts to provide high quality products, Autodesk has released below hotfix to address the incorrect hotkey issue for the command “Delete” in the context menu of part environment in French Inventor 2013 products.
This document contains the latest information regarding the installation and use of this update. It is strongly recommended that you read this entire document before you apply the update to your product. For reference, you should save this document to your hard drive or print a copy.
Contents
The hotfix is released to fix the incorrect hotkey issue for the command “Delete” in the context menu of part environment in French Inventor 2013 products.
The hotfix should only be applied to systems directly affected by the issue described above, as this was the only issue this hotfix was created to address.
For application of this hotfix, your system must have the following products installed:
· Autodesk® Inventor® Professional 2013
· Autodesk® Inventor® 2013
1. Download hotfix “Inventor2013_Delete_FRA_X86.zip” for 32bit OS or “Inventor2013_Delete_FRA_X64.zip” for 64bit OS.
2. Unzip the downloaded file.
3. Make a backup copy for below .dll file:
It is located in the installation folder of Inventor. Usually, the path is:
……\Autodesk\Inventor 2013\Bin\fr-FR
4. Copy the extracted file to the same installation folder, overwriting the file located there.
We thank all our customers who identified this issue and reported it to us. These reports give us the opportunity to improve the product and provide you with the best solution in mechanical design. We also thank you for your continued business and for feedback regarding the content of this update release.
Respectfully,
Autodesk Inventor Product Team
Copyright © 2012 Autodesk, Inc.