Autodesk
® AutoCAD
® Civil 3D
® 2015 Service Pack 1 Readme
Thank you for downloading Autodesk® AutoCAD® Civil 3D® 2015 Service Pack 1.
This readme contains the latest information regarding the installation and
use of this service pack. It is strongly recommended that you read this entire
document before you apply this service pack to your product. Autodesk® AutoCAD® Civil 3D® 2015 Service Pack 1 contains the fixes included in Autodesk® AutoCAD® 2015 Service Pack 1 and Autodesk® AutoCAD® Map 3D 2015 Service Pack 2. This service pack includes the Autodesk AutoCAD Security Hotfix.
Because Autodesk AutoCAD Civil 3D is built on Autodesk AutoCAD and Autodesk AutoCAD Map 3D, it is recommended that you also review the AutoCAD and AutoCAD Map 3D readme files at the following locations. For reference, you should save these documents to your hard drive or print a copy.
Autodesk AutoCAD® 2015 Service Pack 1 Readme
Autodesk® AutoCAD® Map 3D 2015 Service Pack 2 Readme
Contents
You can apply this service pack to the following Autodesk products running on all
supported operating systems and languages. Be sure to install the correct
service pack for your software.
You can also use Autodesk Application Manager to install the Live Update Maintenance Patches, which will automatically show the correct Hotfix or Service Pack for your product.
64-bit Product |
Service Pack |
| Autodesk AutoCAD Civil 3D 2015 |
C3D2015_x64_SP1.0.exe |
Return to Top
The following issues have been resolved in Autodesk AutoCAD Civil 3D 2015 Service Pack 1:
Corridor Modeling and Analysis
- A data-specific issue has been resolved where attempting to rebuild a corridor would cause the application to close unexpectedly.
- An issue has been resolved where material take off would compute only half of the areas of the materials when more than one baseline existed.
- An issue has been resolved where the corridor feature line areas were not using the code set styles assigned to the corridor.
- An issue has been resolved where the elevation target in the DaylightBasin and DaylightBasin 2 subassemblies was incorrectly solving for the basin elevation.
- An issue has been resolved where the German Country Kit assembly GermanSA_Fahrbahn_ausserorts was missing the feature line on the right side in a cut terrain situation.
Pipe Networks and Pressure Networks
- An issue has been resolved where data-referenced gravity pipe network styles were reset when the source model was updated and the network was synchronized.
- An issue has been resolved where data-referenced pressure network styles were reset when the source model was updated and the network was synchronized.
- An issue has been resolved where pressure networks were not created properly when using the Create Pressure Network from Industry Model command.
- An issue has been resolved where an invalid part and/or pipe style within a pipe network would cause the application to close unexpectedly.
Alignments and Profiles
- An issue has been resolved where editing an alignment when another profile had been superimposed onto its profile would cause the application to close unexpectedly.
- An issue has been resolved regarding the adjustment of the profile station range when creating a profile after creating and deleting an unrelated alignment.
Survey
- A utility which provides the ability to save an AutoCAD Civil 3D 2015 survey database for use in AutoCAD Civil 3D 2014 is included in this service pack. This utility can be accessed from the AutoCAD Civil 3D Toolbox after installing this service pack.
- An issue has been resolved where attempting to delete a survey figure from the Figures Editor would cause the application to close unexpectedly.
Grading and Surfaces
- An issue has been resolved where deleting all grading projections and repeatedly running the UNDO command would cause the application to close unexpectedly.
- An issue has been resolved where deleting points from a surface when the DACH Extension is installed would cause the application to close unexpectedly.
- An issue has been resolved where draped images that were rendered when hardware acceleration was turned on would be mirrored.
Miscellaneous
- An issue has been resolved where a description was not included from a data-referenced source object.
- An issue has been resolved where unexpected characters and text was added to objects in a drawing and within any drawings that were opened during the AutoCAD Civil 3D session.
- An issue has been resolved where starting AutoCAD Civil 3D in zero document state startup mode would cause the application to close unexpectedly.
- An issue has been resolved where the correct CODES file was not being read from the registry.
- An issue has been resolved where modifying an object on a locked layer would cause the application to close unexpectedly.
- An issue has been resolved where a curve label would show its content reversed when located at 0 and 180 degrees in a drawing.
- An issue has been resolved where the Print button in the Hydraflow Express Rainfall IDF Curve dialog box would not work properly.
Return to Top
As you prepare to install this service pack, keep the following in mind:
Back Up Custom Files
It is recommended that you back up all custom CUIX, MNR, and MNL files before you apply this service pack.
Administrative Privileges
During installation or uninstallation, you may be
prompted for the original installation media or a network image. In order to apply this service pack, you must have privileges to install and uninstall products.
Network Deployment
Administrators can deploy this service pack
over a network using the Deployment Wizard.
Close the Application
When you are installing this service pack, a prompt with options to "Automatically close applications and attempt to restart them after setup is complete" or "Ignore" may be displayed. It is required that you close Autodesk® AutoCAD® Civil 3D® 2015 before proceeding with the installation of Autodesk® AutoCAD® Civil 3D® 2015 Service Pack 1.
Reboot
After you install, it is recommended to reboot your system even if not prompted.
About Your Product
After you install, product information displays in the About dialog box.
Return to Top
Apply This Service Pack to a Stand-Alone Installation
Follow these instructions to install this service pack on a single
computer.
- Download the service pack and save it to any folder.
- Close all running Autodesk applications.
- Insert the product media (for example, the Autodesk AutoCAD Civil 3D installation disc) or make sure the installation source files are available.
- Find the folder where you saved the service pack and double-click the
executable (EXE) file.
Return to Top
Apply This Service Pack Through a Local Network
Follow these instructions to install this Service Pack on multiple computers using your local network.
- Download this Service Pack and save it to any shared folder on your local network.
- Find the shared folder where you saved the Service Pack, and double-click the executable (EXE) file.
Note: Installation through your local network using the CAD Manager Control Utility is not supported for this Service Pack.
Return to Top
Apply This Service Pack to a Network Administrative Image
The following method of distributing Autodesk AutoCAD Civil 3D 2015 Service Pack 1 applies only to administrative images created with the Autodesk AutoCAD Civil 3D 2015 Network Installation wizard. After you complete this procedure, any new deployments of Autodesk AutoCAD Civil 3D 2015 will have the update applied to them automatically. For complete information on updating a Network Administrative Image please see the Autodesk Network Administrator's Guide.
To apply Autodesk AutoCAD Civil 3D 2015 Service Pack 1 to an existing Autodesk AutoCAD Civil 3D 2015 administrative image:
- On the workstation where you initially created the Autodesk AutoCAD Civil 3D 2015 deployment, open the Tools folder and double-click the Create and Modify a Deployment shortcut icon.
- On the Create Deployment > Configure page under Modification Options, select Create a New Deployment Using an Existing Deployment as a Template.
- Specify a new name for the deployment, review and make any other changes, then click Next.
- On the Create Deployment > License Agreement page, review the agreement and click Next.
- On the Create Deployment > Product Information page, review the license information and click Next.
- On the Create Deployment > <Deployment Name> page, click on Autodesk AutoCAD Civil 3D 2015 in the product list to open the Configure options.
- Under Service Packs, select Include Service Pack 1 from Autodesk.com and click Download.
- Select the option to append the service pack(s) to the deployment.
- Review and make any other changes and then click Create. Now any new deployments of Autodesk AutoCAD Civil 3D 2015 will have the service pack applied to them automatically.
Return to Top
Uninstall This Service Pack
Due to an issue with the Microsoft® Windows® operating system, the uninstall process may take longer than expected. For example, you may wait for several hours before the service pack is uninstalled. It is recomended to have the original installation source files for the uninstall to be successful. If the source files are unavaliable, installing the following Microsoft hotfix prior to uninstalling the service pack will prevent the delay:
The removal of an update takes longer than expected in Windows 7 or in Windows Server 2008 R2
Follow these instructions to uninstall this service pack on a single
computer.
- Insert the product media (for example, the Autodesk AutoCAD Civil 3D installation disc) or make sure the installation source files are available.
- In Windows Control Panel > Uninstall a Program, select View Installed Updates.
- Under the Autodesk AutoCAD Civil 3D 2015 heading, right-click on Autodesk AutoCAD Civil 3D 2015 SP1 and choose Uninstall.
It is not possible to uninstall the service pack if the installation source is a network administrative image with service pack 1 merged.
Return to Top
Copyright © 2014 Autodesk, Inc.