Autodesk AutoCAD 2016 Coordination Model Osnap Support Readme

Thank you for downloading Autodesk® AutoCAD® 2016 Coordination Model Osnap Support Feature Update.


This Feature Update provides a way to specify precise locations on an attached coordination model using the standard 2D endpoint and center object snaps. If Endpoint or Center are set as running object snaps, a marker and a tooltip display when you move the cursor over these locations on an attached coordination model.

You can also use these object snaps any time you are prompted for a location and you want to specify a precise location on an attached coordination model. Hold down Shift and right-click in the drawing area to display the Object Snap shortcut menu. Select Endpoint or Center to snap to precise locations on the attached coordination model.


The following system variable has been added.

CMOSNAP (System Variable)

Controls object snapping for coordination models.

Type: Integer
Saved in: Registry
Initial value: 1

0 - Object snapping is disabled for geometry in all coordination model attachments in the drawing.
1 - Object snapping is enabled for geometry in all coordination model attachments in the drawing.


You can apply this Feature Update to the following Autodesk products running on Windows 64-bit operating systems and all supported languages.


This Feature Update can be applied to the above products installed as a standalone application as well as installed from Autodesk Design Suites.


Thank you

We want to express our appreciation for your continued business, and for your feedback regarding this release and Feature Update.

Respectfully,

The Autodesk AutoCAD Product Team


Copyright ©2015 Autodesk, Inc.